Search results for "heterogeneous catalyst"

Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes

2019

Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…

Sustainable Construction of Heterocyclic 1,2,3-Triazoles by Strict Click [3+2] Cycloaddition Reactions Between Azides and Alkynes on Copper/Carbon in…

2019

1,4-Disubstituted-1,2,3-triazoles, considered as an important and useful class of heterocycles with potential applications in material science and biology, have been prepared in an efficient and selective manner by copper on carbon-catalyzed [3+2] cycloaddition reactions of azides and alkynes (CuAAC) in water under strict click chemistry conditions. Copper(I) catalysts heterogenized onto commercially activated carbon materials (Cu-CC) and on another carbon material produced from vegetable biomass using Argan nut shells (Cu-CANS) were found to be versatile catalytic sources for sustainable CuAAC. These copper on carbon supports were prepared and fully characterized by using two types of acti…

Pd nanoparticles immobilized on the poly-dopamine decorated halloysite nanotubes hybridized with N-doped porous carbon monolayer: A versatile catalys…

2020

A hybrid catalyst, Pd@Hal-pDA-NPC, with the utility for promoting both C–C coupling reactions (Sonogashira, Heck and Suzuki reactions) and hydrogenation of nitrocompounds is prepared through two main steps. First, Pd(0) nanoparticles was immobilized on the poly-dopamine decorated halloysite nanotubes (Hal-pDA) and then Pd@Hal-pDA was hybridized with the layers of a novel multi-N-doped porous carbon monolayer derived from 4,4′,4″-((1,3,5-triazine-2,4,6-triyl)tris(azanediyl))tribenzonitrile. The results established that the catalyst could catalyze all the reactions efficiently under mild reaction condition. Moreover Pd@Hal-pDA-NPC exhibited high recyclability (up to ten reac…

Electrochemical treatment of aqueous solutions of organic pollutants by electro-Fenton with natural heterogeneous catalysts under pressure using Ti/I…

2018

The treatment of toxic organic pollutants by electro-Fenton (EF) presents some drawbacks such as the necessity to work at low pH and the low solubility of oxygen in water contacted with air or oxygen at room pressure that results often in slow and relatively low abatements. Here, the coupled adoption of natural heterogeneous catalysts and of relatively high pressure was proposed in order to improve the performances of EF for the treatment of organic pollutants. Caffeic acid (CA) and 3-chlorophenol were used as model resistant organic pollutants. EF process was performed using both conventional homogeneous FeSO4 and natural heterogeneous catalysts (pyrite, chalcopyrite, Fe2O3 and Fe3O4) as i…

Catalytic hydrothermal liquefaction of municipal sludge assisted by formic acid for the production of next-generation fuels

2021

Abstract Hydrothermal liquefaction (HTL) of municipal sludge (MS) was studied at 325 °C and 30 min at 10 and 30% w/w concentration of MS using formic acid (FA) as a green liquid hydrogen donor both in the absence and in the presence of heterogeneous catalysts. Pellets of commercial NiMo/Al2O3, CoMo/Al2O3 and felt of activated carbon ACF 1600 were used as catalysts. The addition of FA at high MS loading allowed to increase the yields in BC from 41 to 62% and its H/C ratio from 1.80 to 2.01 leading to energy recovery (ER) higher than 100%.When heterogeneous catalysts were used together with FA, a marked improvement of BC yields and quality was obtained at 10% MS loading. This behavior was not…

DESIGN OF NOVEL IMIDAZOLIUM BASED NANOSTRUCTURES FOR SUSTAINABLE CATALYTIC APPLICATIONS

Robust Mesoporous CoMo/γ-Al2O3 Catalysts from Cyclodextrin-Based Supramolecular Assemblies for Hydrothermal Processing of Microalgae: Effect of the P…

2018

Hydrothermal liquefaction (HTL) is a promising technology for the production of biocrude oil from microalgae. Although this catalyst-free technology is efficient under high-temperature and high-pressure conditions, the biocrude yield and quality can be further improved by using heterogeneous catalysts. The design of robust catalysts that preserve their performance under hydrothermal conditions will be therefore very important in the development of biorefinery technologies. In this work, we describe two different synthetic routes (i.e., impregnation and cyclodextrin-assisted one-pot colloidal approach), for the preparation in aqueous phase of six high surface area CoMo/γ-Al2O3 catalysts. Cat…

One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications

2020

Abstract A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange phot…

Electrochemical Abatement of Organic Pollutants in Water by Electro- Fenton with Natural Heterogeneous Catalysts Under Pressure

2020

In recent decades, electrochemical advanced oxidation processes (EAOPs) have proved as alternative technologies to conventional processes. Indeed, EAOPs can often allow to treat wastewater containing toxic and POPs. Among them, electro-Fenton (EF) is considered particularly promising for the treatment of recalcitrant organics, since it presents various advantages, including high abatements for many organic pollutants, simplicity of equipment and operations, relatively low cost and low consumption of chemicals. Recently, the utilization of some natural heterogeneous catalysts was proposed in order to avoid some disadvantages of the conventional EF process. In this frame, in this work EF proc…

Exploring the catalytic performance of a series of bimetallic MIL-100(Fe, Ni) MOFs

2019

[EN] A series of mixed-metal Fe-III/Ni-II metal-organic frameworks (MOFs) of the MIL-100 type containing different metal ratios have been synthesized de novo, following an approach that requires tuning of the Fe-III/Ni-II reactivity. The resulting heterometallic MIL-100(Fe, Ni) materials maintain thermal, chemical and structural stability with respect to the parent MIL-100(Fe) MOF as can be deduced from various techniques. The nature and the oxidation state of the accessible metal cations have been evaluated by in situ infrared spectroscopy and extended X-ray absorption fine structure measurements. The obtained mixed-metal MOFs and the parent material have been evaluated as heterogeneous ca…